Samplers on ACID

Everything we love about Samplers from E-MU, AKAI, Ensoniq, Kurzweil, Roland, and all the rest.

You are not logged in.

#26 2015-11-26 20:26:08

mrcrappypantson
Member
Registered: 2015-11-14
Posts: 5

Re: New fan for emu e6400 ultra

JImmySingh wrote:
mrcrappypantson wrote:
JImmySingh wrote:

i received my xm-1 today, its much quite than the old one, so thats a relief... But the original is 40x40x20 instead of 10mm. Does that make a difference in cooling?

Is this the correct one?
The the watts differs instead of 0.6 watt its 0.36 watts.

and 0.03 amp

How many pins are in your machines? My e4xt has four while this fan only will accept 3.

Just from the back view, leave the first pin from the right. And the fan will do...

Do you have an image of yours? im just in doubt that min is 0,36 watts.

I'm not home now but I'll check when I get home.

Can you upload a photo???

Last edited by mrcrappypantson (2015-11-26 20:51:41)

Offline

#27 2015-11-26 23:22:41

mrcrappypantson
Member
Registered: 2015-11-14
Posts: 5

Re: New fan for emu e6400 ultra

My watts and amps are the same.

Offline

#28 2015-11-28 19:25:23

CF3
Member
Registered: 2015-04-05
Posts: 20

Re: New fan for emu e6400 ultra

Yes the Ultras have 4 pins while the XM-1 fan has 3 pins. This is not an issue. Just go POSITIVE TO POSITIVE, NEGATIVE TO NEGATIVE. I had to modify the fan connector by cutting off the little plastic ends with a pair of wire cutters.

Offline

#29 2015-11-30 20:30:54

JImmySingh
Member
From: NL
Registered: 2015-11-19
Posts: 13

Re: New fan for emu e6400 ultra

mrcrappypantson wrote:

My watts and amps are the same.

Same as?

Offline

#30 2015-11-30 21:01:20

mrcrappypantson
Member
Registered: 2015-11-14
Posts: 5

Re: New fan for emu e6400 ultra

JImmySingh wrote:
mrcrappypantson wrote:

My watts and amps are the same.

Same as?

Same as yours.

Offline

#31 2018-09-01 20:04:55

Andreaux
Member
Registered: 2018-09-01
Posts: 1

Re: New fan for emu e6400 ultra

I know it's a quite old thread, but this might be useful for one looking for a super silent fan replacement in an E-MU Sampler (or actually anything else)... I swapped mine for a Noctua fan, which is literally noiseless. It's a 1-1 replacement as it's the same size and comes with rubber silents to mount it vibration free. You either cut and tap the original wire, or use the adapters provided (3 wire connectors) (different adapters mean different RPM-s for low or ultra-low noise).

I got them from Amazon here: in the US: https://amzn.to/2NaNrT4 in the UK: https://amzn.to/2PnQnt8 or Germany: https://amzn.to/2C8IHch

It took a while until I found these, but they are really the best. Since then, I replaced the fans in my NAS, my 3D printer, etc. all to Noctua because they're really-really-really silent and in a studio, that's what you want smile
I also ditched the internal HDD for an IDE-to-CF adapter and the floppy for a USB floppy emulator... so noise, begone big_smile

Offline

#32 2018-10-24 10:15:40

flextone
Member
Registered: 2018-10-24
Posts: 4

Re: New fan for emu e6400 ultra

Thanks Andreaux!

Offline

#33 2018-10-27 22:20:47

FREEZONE
Member
Registered: 2018-10-27
Posts: 1

Re: New fan for emu e6400 ultra

Thank You!

Andreaux wrote:

I know it's a quite old thread, but this might be useful for one looking for a super silent fan replacement in an E-MU Sampler (or actually anything else)... I swapped mine for a Noctua fan, which is literally noiseless. It's a 1-1 replacement as it's the same size and comes with rubber silents to mount it vibration free. You either cut and tap the original wire, or use the adapters provided (3 wire connectors) (different adapters mean different RPM-s for low or ultra-low noise).

I got them from Amazon here: in the US: https://amzn.to/2NaNrT4 in the UK: https://amzn.to/2PnQnt8 or Germany: https://amzn.to/2C8IHch

It took a while until I found these, but they are really the best. Since then, I replaced the fans in my NAS, my 3D printer, etc. all to Noctua because they're really-really-really silent and in a studio, that's what you want smile
I also ditched the internal HDD for an IDE-to-CF adapter and the floppy for a USB floppy emulator... so noise, begone big_smile

Offline

Board footer

Powered by FluxBB