Samplers on ACID

Everything we love about Samplers from E-MU, AKAI, Ensoniq, Kurzweil, Roland, and all the rest.

You are not logged in.

#1 2015-10-08 19:58:00

halogamer
Member
Registered: 2015-10-08
Posts: 1

Updating to EOS 4.7 with USB Floppy and Windows 10

I recently got an e6400 Ultra with EOS 4.2 on it, so I bought a USB floppy to make update. After some research, I found that people said it was only possible with an internal floppy drive, but I found a way to do it. I was surprised that no one had made img files for Flash Prep and EOS 4.7, so I took care of that. You don't need to mess around with the exes or anything.

What you'll need to do is download this software called Omniflop.

1) Put a blank floppy into your USB floppy drive

2) Open Omniflop and click "Next", "OK", and select "Write Disk"

3) Click "Next" and choose the drive letter for your floppy

4) Click "Next" and choose "EMU EOS" for the format.

5) Click "Next" and browse for the img file you want too write.

6) Click "Finish" and let it write to the floppy.

When it's done, you should have your Flash Prep or EOS 4.7 floppy.

Here are the links for the img files:
EOS 4.7: http://www.mediafire.com/download/o9jr0 … S_4.70.img
Flash Prep: http://www.mediafire.com/download/8nj27 … h_Prep.img

Offline

#2 2016-01-30 19:50:11

Eskadrone
Member
Registered: 2016-01-30
Posts: 1

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

Just registered here to say thank you. Helped a lot.

Offline

#3 2016-03-16 22:20:26

sicduk
Member
Registered: 2016-03-16
Posts: 1

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

I can't get omniflop to work for the life of me. Help!!
(Windows 10)

Drivers won't install. I did everything right idfk how to do this

Offline

#4 2017-08-27 13:16:57

LloydFa
Member
Registered: 2017-08-17
Posts: 1

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

sicduk wrote:

I can't get omniflop to work for the life of me. Help!!
(Windows 10)

Drivers won't install. I did everything about http://www.marinemammalconservancy.org/ testosterone boosters right idfk how to do this

Same here, I tried but couldn't get it to work.

Last edited by LloydFa (2018-05-25 07:59:43)

Offline

#5 2018-03-08 21:59:32

kf11
Member
Registered: 2018-03-08
Posts: 1

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

I´ve been trying to get this to work for the past two days. No luck so far. Win10 won´t let me install the right driver for Omniflop.

Offline

#6 2018-05-23 23:36:47

iSteve
Member
Registered: 2017-07-30
Posts: 3

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

I just managed to get some used but reliable floppy disks.  So far, I have just copied the system onto one disk directly from the make disk utility of an E5000. When I boot the E5000 with the disk in, I get the option to update the OS (EOS 4.70), but I haven't tested it yet.  If I can, this summer I will try to downdate to something less, if I can find a lesser OS for the ultra.  I probably have it--somewhere.  I have in the past used the E-Mu update disk extractors, probably on a Win 98SE PC.  I have the use of a usb drive that I plan to try on win 10 and will see if the original E-Mu upgrade disk maker will work.  If you are still looking for a solution, I could put test it this weekend.

Offline

Board footer

Powered by FluxBB