Samplers on ACID

Everything we love about Samplers from E-MU, AKAI, Ensoniq, Kurzweil, Roland, and all the rest.

You are not logged in.

#1 2015-10-08 19:58:00

halogamer
Member
Registered: 2015-10-08
Posts: 1

Updating to EOS 4.7 with USB Floppy and Windows 10

I recently got an e6400 Ultra with EOS 4.2 on it, so I bought a USB floppy to make update. After some research, I found that people said it was only possible with an internal floppy drive, but I found a way to do it. I was surprised that no one had made img files for Flash Prep and EOS 4.7, so I took care of that. You don't need to mess around with the exes or anything.

What you'll need to do is download this software called Omniflop.

1) Put a blank floppy into your USB floppy drive

2) Open Omniflop and click "Next", "OK", and select "Write Disk"

3) Click "Next" and choose the drive letter for your floppy

4) Click "Next" and choose "EMU EOS" for the format.

5) Click "Next" and browse for the img file you want too write.

6) Click "Finish" and let it write to the floppy.

When it's done, you should have your Flash Prep or EOS 4.7 floppy.

Here are the links for the img files:
EOS 4.7: http://www.mediafire.com/download/o9jr0 … S_4.70.img
Flash Prep: http://www.mediafire.com/download/8nj27 … h_Prep.img

Offline

#2 2016-01-30 19:50:11

Eskadrone
Member
Registered: 2016-01-30
Posts: 1

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

Just registered here to say thank you. Helped a lot.

Offline

#3 2016-03-16 22:20:26

sicduk
Member
Registered: 2016-03-16
Posts: 1

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

I can't get omniflop to work for the life of me. Help!!
(Windows 10)

Drivers won't install. I did everything right idfk how to do this

Offline

#4 2017-08-27 13:16:57

LloydFa
Member
Registered: 2017-08-17
Posts: 1

Re: Updating to EOS 4.7 with USB Floppy and Windows 10

sicduk wrote:

I can't get omniflop to work for the life of me. Help!!
(Windows 10)

Drivers won't install. I did everything right idfk how to do this

Same here, I tried but couldn't get it to work.

Offline

Board footer

Powered by FluxBB